Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Polybest 66 PD GF25 HSL  - PA66-GF25 - Polyma Kunststoff GmbH & Co.KG

Material Data Center offers the following functions for Polybest 66 PD GF25 HSL :
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Polybest 66 datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ASTM数据
模压收缩率, 平行 0.005 mm/mm ASTM D 955
机械性能干 / 已调节单位Test Standard
ISO数据
Izod冲击强度, +23°C 60 / - kJ/m² ISO 180/1U
ASTM数据
断裂拉伸强度 155 / 100 MPa ASTM D 638
断裂伸长率 3 / 4 % ASTM D 638
弯曲模量 8500 / 6000 MPa ASTM D 790
洛克硬度 R 120 / R 115 - ASTM D 785
热性能价值单位Test Standard
ASTM数据
UL94 燃烧性 HB - UL 94
测试厚度 1.6 mm -
DTUL @ 66 psi 250 °C ASTM D 648
DTUL @ 264 psi 240 °C ASTM D 648
熔点 260 °C ASTM D 3418
维卡温度 255 °C ASTM D 1525
电性能干 / 已调节单位Test Standard
ASTM数据
表面电阻率 * / 1E11 Ohm ASTM D 257
体积电阻率 1E15 / 1E11 Ohm*cm ASTM D 257
其它性能价值单位Test Standard
吸水率, 24小时 0.8 % ASTM D 570
密度 1320 kg/m³ ASTM D 792
典型数据
供货形式
自然色
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.